HOME | PRODUCTS | WHO USES | PRICES | ABOUT US | CONTACT |
Rotator Switch 4x8
If you have more than one radio room (Shack) and/or more than one Rotator on your directional antennas, then Rotator Switch RS-48 is the solution. With it you will use only one controller on the table and it will be able to control till eight antenna rotators.
  • The RS-48 can select between eight rotators using only one controller for each shack.
  • The system can use till four controllers.
  • One interlock system don't permit connections for rotators in use on other shack.
  • It is possible to automate all station.
  • On systems where the Hamplus MBD-12F is installed, the rotator assigned to each antenna are called on each change.
  • The RS-48 comutates eight wires.


Specifications:


Size:
45cm width, 7cm height and 25,5cm deep
Power suply :
14 volts
Max. switch current:
8 amp.
Switching:
8 Wires


On the follow drawings we are use the YAESU G2800-DXA, but can be used any rotator and controller model.

Wiring diagram exemples:


Four radios and eight rotors


More Hamplus:
Copyright Hamplus .