Rotator Switch
3x4 |
|
If you have more than one radio
room (Shack) and/or more than one Rotator on your directional
antennas, then Rotator Switch RS-34 is the solution. With
it you will use only one controller on the table and it
will be able to control till four antenna rotators. |
|
- The
RS-34 can select between four rotators using only one
controller for each shack.
- The
system can use till three controllers.
- One
interlock system don't permit connections for rotators
in use on other shack.
- It
is possible to automate all station.
- On
systems where the Hamplus MBD-8E is installed, the rotator
assigned to each antenna are called on each change.
- The
RS-34 comutates four wires, two for the motor power
and two for the variable resistor on the direction indicator
system.
|
Specifications:
Size:
|
28cm width, 4cm height e 15cm
deep |
Power
suply :
|
14 volts |
Maximum operate current:
|
8 amp. |
Switching:
|
4 Wires |
|
|
On the follow
drawings we are use the YAESU G2800-DXA, but can be used any
rotator and controller model.
Wiring diagram exemples:
Four rotator and one controller |
|
Four rotator, one controller and one
antenna switch |
|
Four rotators, three controllers and
one antenna switch |
|
|
|