HOME | PRODUCTS | WHO USES | PRICES | ABOUT US | CONTACT |
Rotator Switch 2x8
If you have more than one radio room (Shack) and/or more than one Rotator on your directional antennas, the Rotator Switch RS-28 is the solution. With it you will use only one controller on the table and it will be able to control till eight antenna rotators.
  • The RS-28 can select between eight rotators using only one controller for each shack.
  • The system can use till two controllers.
  • One interlock system don't permit connections for rotators in use on other shack.
  • It is possible to automate all station.
  • On systems where the Hamplus MBD-8E / F or MBD-12F is installed, the rotator assigned to each antenna are called on each change.
  • The RS-28 comutates eight wires.


Specifications:


Size:
24,5 cm width, 7cm height and 25,5cm deep
Power suply :
14 volts
Max. switch current:
8 amp.
Switching:
8 Wires


On the follow drawings we are use the YAESU G2800-DXA, but can be used any rotator and controller model.

Wiring diagram exemples:


Two radios and eight rotors



Downloads:  
RS-28 Connectors Pin Indetification  
More Hamplus:
Copyright Hamplus .